Front Panel Reset Button - Black Box ASTC3000 User Manual

 P. - Paper Detect Only: This setting will disable the Print Bar and
automatically print when media is inserted into the Auto-Sync Time Clock and
contacts the print margin (Paper Sensor). For this method, you must set a
desired print margin using the Margin Selector.
 S.P. - Paper Detect & Print Switch: This Print Method is for manual printing
when the alignment of the imprint on your document is critical. For this method,
you must set a desired print margin using the Margin Selector. To print, insert
media into the Auto-Sync Time Clock until it contacts the print margin, and
press the Print Bar.
 S. - Print Switch Only: This setting will allow you to print manually regardless
of print margin setting by inserting media into the Auto-Sync Time Clock and
pressing the Print Bar.
NOTE: Printing when no media is present may cause damage to the print head.
2.10.

Front Panel Reset Button

The front panel (see Figure 2-18) reset button can be accessed by removing the
upper cover (see Figure 2-2).
Figure 2-18. Auto-Sync Time Clock Front Panel.
724-746-5500
Chapter 2: Installation
| blackbox.com
2-15