Command File Settings; Other Options - Brady Command File Interpreter Manual

Command File Interpreter White Paper

Command File Settings

Watch Directory: Allows you to select the file analysis
directory.
Default Label: Allows you to define a default label, to
be printed if no label is defined in the command file.
Default Output Printer: Allows you to define a default
printer, to be used if no printer is defined in the
command file.

Other Options

Minimize main window - Allows you to minimize the
main window of the labeling software when the
Command File Interpreter is launched.
Backup incoming files - Usually, all command files
are deleted after printing. Activate this function to save
a backup with the extension .bak in the same
directory. For reasons of disk space, these files will be
stored for just two days.
Stop processing on error - In the event of a printing
error, the Command File Interpreter will stop
processing.
Printers - Allows you to select up to three printers that
can be used by the Command File Interpreter.
Display only selected printers - Allows you to
display only the printers selected, if the list of printers
is very long.
Start - Allows you to launch Command File
Interpreter. Once launched, the monitor window
appears.
4