Table of Contents
Advertisement
English
Español
4. Press and release the ADAPTiQ
®
Acoustimass
module connector panel. The system
announces "English" as the selected language.
To select a different language, press ADAPTiQ
repeatedly until you hear the language you want.
5. Press Play to continue in the selected language.
Follow the audio prompts from your system to
complete the process.
RC-35S2
remote control:
Play
6. Place the module in its final position and orienta-
tion (standing on its feet or laying on its side).
Français
®
button on the
ADAPTiQ
button
PERSONAL
®
music center II:
Play
During the process:
• If you get interrupted and are temporarily called
away from the system, you can return within 10
minutes and continue. After 10 minutes, the system
cancels the calibration process and returns to
normal operation, leaving your system unchanged.
• To cancel and leave your system unchanged, press
and release the ADAPTiQ button.
• To reset the system to factory settings, press and
hold the ADAPTiQ button until you hear a
confirmation message.
7. When the process is done, unplug the ADAPTiQ
headset from the audio input cable and store it in a
safe place.
You can leave the audio input cable connected for
when you might need to connect the ADAPTiQ headset
again or connect a local audio source. See "Listening
to a Local source" on page 18.
When would I need to run the ADAPTiQ cali-
bration process again?
• If you rearrange the furniture in the room or place any
speaker system component in a different location or
orientation.
• If you move the speaker system to a different room.
S
S
YSTEM
ETUP
17
Advertisement
Table of Contents
