Preparing The Bose ® Aviation Headset; Preparing The Bose Aviation Headset X For Use; Attaching Or Relocating The Boom Microphone Cable; Detaching The Boom Microphone Cable Or Connector Access Cover - Bose Aviation Headset X Owner's Manual

Preparing the Bose Aviation Headset X for use

Most Bose headsets are shipped with the boom microphone cable
attached. Some headset configurations are shipped with the cable
packed separately in the shipping container. All headset configurations
allow the boom microphone cable to be attached to either earcup, at
the user's option.
Figure 2
Attaching the boom
microphone cable
boom
microphone
cable

Attaching or relocating the boom microphone cable

Detaching the boom microphone cable or connector access cover

If necessary, remove the boom microphone cable or the connector
access cover from the earcup as follows:
Note: Do not twist the boom microphone cable while disconnecting.
Twisting can damage the connector pins.
Preparing the Bose
1. Loosen the two captive screws using a flat-tipped
screwdriver (see Figure 2).
2. Pull the cable or the cover away from the earcup in a
direction parallel to the screw axes.
®
Aviation Headset X
loosen screws
several turns
connector
access
cover
11