Personalizing Your Acoustic Wave; Music System Ii; Factory Settings; Changing System Settings - Bose Acoustic Wave Music System II Owner's Manual

Personalizing Your Acoustic Wave

Factory settings

Changing system settings

Figure 20
Controls used for changing
system settings
20
System settings were chosen at the factory to satisfy most owners of an Acoustic
Wave ® music system II. However, if you wish to change any of the system settings
and personalize your system, use the system setup menu.
To change system settings, perform the following steps. Refer to Figure 20 and the setup
menu table on page 21.
1. Press and hold Menu until –SETUP MENU– is displayed.
2. Press Options until the menu option you want to change is displayed.
3. Press Adjust to change the value or selection.
4. Repeat Steps 2 and 3 as necessary to make other changes.
5. Press any button other than Menu or Play Mode to exit the setup menu. If you don't
press any button, the system automatically will exit the setup menu after 10 seconds.
Play Mode – Options
Selects the setup menu
option you want to change.
®

Music System II

Menu – Adjust
• Press and hold: Accesses the setup menu.
• Press: Changes the setting for the selected
option.