Related Manuals for QSC CSM10
Summary of Contents for QSC CSM10
- Page 1 Concert Stage Monitor Loudspeaker User Manual CSM10 – 10" Full-range loudspeaker CSM12 – 12" Full-range loudspeaker CSM15 – 15" Full-range loudspeaker TD-000279-00-A *TD-000279-00*...
-
Page 2: Important Safety Precautions And Explanation Of Symbols
Follow all instructions. Clean only with a dry cloth. Install in accordance with all QSC instructions and documentation. Suspension and mounting should be attempted only by those who are trained and skilled in safe suspension and mounting practices. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - Page 3 Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscaudio.com. Contact us at 800-854-4079 or visit our website at www.qscaudio.com. The QSC limited warranty is valid for a period of three (3) years from date of purchase in the United States and many (but not all) other countries.
-
Page 4: Signal Processing
The algorithms have been developed using QSC processing products and can not be readily replicated on other DSP platforms. In order to enjoy all the performance that your QSC CSM speakers can deliver, it is important to use the correct QSC signal processors loaded with the appropriate processing settings. - Page 5 Selecting Coverage Pattern On the side of the speaker you will find the shutter switch which will allow the lip extension to be engaged in either an Asymmetric (ASYM) or Symmetric (SYM) configuration. (Figure 1) To select coverage pattern, insert a standard flat blade screw driver into the slot provided and push to release shutter.
-
Page 6: Controls And Connections
Controls and Connections The input connector for the CSM is mounted on the bottom side of the enclosure. To gain access to the connectors use the front handle to tilt the speaker onto the skids located on the flat back side allowing full access to the recessed connector pocket and mode selection switch. Mode Selection Switch MODE Selection Switch Located on the input plate housing is the Mode selection switch... -
Page 7: Specifications & Dimensions
Specifications | Dimensions CSM10 CSM12 CSM15 Configuration 2-way wedge 2-way wedge 2-way wedge Transducers Low-frequency 10" / 3" voice coil woofer 12" / 4" voice coil woofer 15" / 4" voice coil woofer High-frequency 3" diaphragm / 1.4 exit 3” diaphragm / 1.4 exit 3”... -
Page 8: Telephone Numbers
© 2009 QSC Audio Products, LLC. All rights reserved. QSC, and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. Neutrik is a trademark of Neutrik. All other trademarks are the property of their respective owners. Patents may apply or be pending.