S E L E C T I N G A P R E S E T S T A T I O N - Primare T21 User Manual

While you are searching for a specific frequency the front panel display shows
the frequency and signal strength for the antenna (from 0-9):
]A
B B C R 4
] AStation name.
] BSignal strength.
In addition to the display there are three indicators:
• The STEREO indicator lights up when the T21 is receiving a stereo
broadcast.
• The CENTER indicator lights up when the T21 is tuned to the exact
frequency of the transmitter.
• The -RDS- indicator lights up when a station broadcasting RDS data is
received.
]B ]C
S 1 P 1 3
] CPreset number.

S E L E C T I N G A P R E S E T S T A T I O N

When the PRESET indicator is lit you can use the UP and DOWN buttons to
search through your stored stations.
To enter Preset mode
• Press the PRESET button until the PRESET indicator lights up.
To store a station as a preset
The Primare T21 Tuner allows you to store up to 30 preset stations, called P01
to P30, so that you can select them immediately from the front panel or from
the C31 Remote Control.
• Tune to the radio station you wish to enter as a preset.
• Press the STORE button on the front panel.
The display will indicate the next available preset number by flashing digits, eg
"P12".
• If you accept the suggested preset number, press the STORE button again.
The station will now be stored with that number and the preset digits will stop
flashing.
If you want to allocate a different preset number:
• Press the STORE button followed by either the UP or DOWN buttons,
until the desired preset number appears flashing in the display.
Using the T21 Tuner
<
5