S W I T C H I N G O N A N D O F F; F R O N T P A N E L D I S P L A Y; T U N I N G T O A S T A T I O N - Primare T21 User Manual

Using the T21 Tuner
>

S W I T C H I N G O N A N D O F F

To switch on
• Use the switch under the left-hand edge of the front panel.
During normal operation you can leave the T21 switched on and in standby
mode.
To switch to standby
• Press the STANDBY button on the front panel.
To switch on from standby
• Press the STANDBY button on the front panel, or the CHA or CHV
button on the C31 Remote Control.

F R O N T P A N E L D I S P L A Y

The display on the front of the T21 Tuner is controlled by the DISPLAY button
and allows you to see various details about the broadcast:
]A
B B C R 4
] AStation name.
] BSignal strength.
4
]B ]C
S 1 P 1 3
] CPreset number (if assigned).
Each time you press the DISPLAY button, the display will step between the
following options:
Display option
Station Name
RadioTEXT
Frequency

T U N I N G T O A S T A T I O N

When the PRESET indicator is off you can use the UP and DOWN buttons to
engage scan or manual tuning up and down the frequency band.
To start tuning
• Press the PRESET button until the PRESET indicator extinguishes.
To scan tune
By pressing the UP or DOWN button for more than one second and then
releasing, the tuner will scan for the first strong signal from a radio station
where it will stop. Press and hold either the UP or DOWN button again to
continue searching.
To manually tune
By pressing on the UP or DOWN buttons rapidly, you can perform manual
tuning up or down the frequency band for precise tuning to a specific
frequency. With each successive press of the UP or DOWN buttons, the T21
will take 0.05MHz steps up or down.
Example
BBC R4 S8 P11
The Easter Story
93.300M S8 P11