PIAGGIO Fly 150 4T Workshop Manual page 145

Fly 125 - 150 4T
Engine
- Remove the sprayer.
N.B.
WHEN CLEANING THE CARBURETTOR BODY
REMOVE THE SPRAYER TO AVOID LOSING
PARTS. IF THE SPRAYER IS FORCED IN ITS
HOUSING DO NOT ATTEMPT TO REMOVE IT
AS THIS WILL ONLY DAMAGE IT.
-Remove the minimum nozzle.
- Remove the minimum flow set screw and the
spring.
CAUTION
DO NOT ATTEMPT REMOVING PARTS EM-
BEDDED IN THE CARBURETTOR BODY SUCH
AS: FUEL SUPPLY PIPE, PLUNGER HOUSING,
STARTER NOZZLE, PIT COVER FOR PRO-
GRESSIONS AND INLET NOZZLE, MINIMUM
AND MAXIMUM AIR GAUGE, THROTTLE
VALVE CONTROL SHAFT. DO NOT REMOVE
THROTTLE-SHAFT CONNECTION SCREWS.
THE FIXING SCREWS ARE CAULKED AFTER
ASSEMBLY AND THEIR REMOVAL DAMAGES
THE SHAFT.
ENG - 145