Table of Contents
Advertisement
What to do if ...
Correcting Malfunctions
Perhaps a malfunction has been caused by a minor error, which you can
correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
1
Warning! Refrigerators/freezers must only be repaired by trained
personnel. Repairs carried out by untrained personnel can lead to
substantial danger for the user. Please contact your local Service Force
Centre for repairs or service.
No power to the appliance.
The temperature in the refrigerator/
freezer is too high.
Temperature display shows a rectangle.
Warning tone sounds, red warning display
and freezer temperature display are
flashing.
The compressor runs continuously
818 20 85-01/2
Symptom
Solution
Check there is power at the socket
Check there is not a power cut by
checking the household lights.
Check the fuse has not blown.
Check the ambient temperature is within
the appliances operating limits
Check the temperature is correctly set
relative to ambient conditions.
There is a function fault.
Please inform your local Service Force
Centre. Do not open the door of the
appliance again.
Temperature warning for freezer.
Please check in "Control and Information
System" section.
Adjust the temperature using the „+" and
„-" buttons to obtain correct temperature
control.
Check that the door is closed.
Large quantities of food have recently
been placed in the cabinet and/or door is
frequently opened.
Check that air ventilation is not
obstructed.
39
Advertisement
Table of Contents
