Table of Contents
Advertisement
1. Under the Configuration tab, select Security on the main menu, select Advanced from the left-
hand menu, and then select Rogue AP. The Rogue AP screen will display, as shown in
Figure 3-8
below.
Figure 3-14
2. Check the Turn Rogue AP Detection On radio box to enable Rogue AP Detection and click
Apply.
If you enable Rogue AP Detection, the AP continuously scans the wireless network and
collects information about all APs heard on its channel.
3. You can Import AP List from a File. See
for more information.
4. Under the Unknown AP List, click Refresh to discover the APs.
5. Click Move to add any AP to the Known AP List.
6. Click Delete to remove an AP from the Known AP List.
7. Click Save to export the list of known APs to a file. A window opens so you can browse to the
location where you want to save the file. The default file name is WNDAP330Rogue.cfg.
8. Click Apply to save your change.
Management
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
"Importing Rogue AP List from a File" on page 3-20
v1.0, May 2008
3-19
Advertisement
Table of Contents
