Smart Wizard Status Bar - NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0 Adapter User Manual

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
If you right-click the WNDA3100v2 icon in the system tray, you can disable its Internet
notification feature by clearing the check mark enabling notification, as shown in the following
figure. If you do so, then only the IP address is shown.
Figure 1-9
In Vista, there is one more option: Enable NETGEAR Smart Wizard.
Figure 1-10
If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard is
disabled, and you must set up the wireless adapter with Vista auto-configuration.

Smart Wizard Status Bar

Click the icon to open the Smart Wizard Settings tab. The status bar is located at the bottom of
the Settings tab.
Wireless
network
Join a Network
Figure 1-11
The following table describes how to interpret the Smart Wizard status bar.
Understanding the Status Bar
Wireless network Identifies which wireless network you have joined.
Security • A closed lock indicates that security is enabled.
• An open lock indicates an open network without wireless security.
Channel
Security
Connection status
v1.0, June 2009
Data rate
Signal
strength
1-11