[Quality]; [Sensitivity] - Panasonic Lumix DMC-TZ30 Operating Instructions Manual

• For [Rec] menu setting procedures (→51)
Set quality of picture.
■
Recording mode:
■
Settings: ([Fine]) High quality, priority to picture quality
([Standard]) Standard quality, priority to the number of pictures
●
The setting is fixed to
●
When [3D Photo Mode] is selected, the displayed icons are different:
([3D+Fine]): An MPO picture and a high quality JPEG picture are recorded
simultaneously.
([3D+Standard]): An MPO picture and a standard quality JPEG picture are recorded
• For [Rec] menu setting procedures (→51)
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
■
Recording mode:
■
Settings: [AUTO] /
Setting guide

[Sensitivity]

Location
(recommended)
Shutter speed
Interference
Subject blur
●
[AUTO] is automatically set in a range up to 800 (1600 when flash is used) based on
subject brightness.
●
[Intelligent ISO] is automatically set in a range up to 1600 based on subject
movement and brightness.
●
The [Sensitivity] is automatically set in the following cases:
• When recording motion pictures
• When [Burst] is set to [Flash Burst]

[Quality]

, in [High Sens.] Scene Mode.
simultaneously.
[Sensitivity]
[Intelligent ISO] / [100] / [200] / [400] / [800] / [1600] / [3200]
[100]
Bright
(outdoors)
Slow
Low
High
- 96 -
Using the [Rec] menu
[3200]
Dark
Fast
High
Low