Nakajima AE-710 Operation Manual page 18

position carrier
T h e b a s t
L y p e w r i t e r
A
T h e b e s t
t y p e w r i t e r
A
tr
T h e b ^ s t
t y p e w r i t e r
Manual correction (correcting characters outside the correction
memory)
I ) Use the Index key or Reverse index key to position the print
point indicator on the line which contains the error. The line
locator (red line) marked on the card holder should be line up
below the line. Do not use the platen knob for alignment.
2) Use the Backspace key or Space bar to position the print point
indicator on the character to be corrected.
Note:
Use the micro up/micro down/micro back space for accurate
alignment. See "Micro Up/lr4icro Down/Micro Space" in the
Typing Functions" chapter.
3) Hold down the Code key and press the Correction key.
4) Press the character to be erased. The character is erased and the
print point indicator remains at that position.
5) Type the conect character(s).
t 4