Special Features; Getting Ready - Bissell Steam Mop 90T1 SERIES User Manual

S
pecial features
Removable water tank
The water tank is located on the back of
the Steam Mop. It can be refilled with
water any time during use. Distilled or
demineralized water may be used in
place of tap water.
Do not use chemicals with your
Steam Mop.
Water filter
This filter removes minerals and other
impurities from tap water, preventing
water deposits from damaging your
Steam Mop. It should be replaced when
the bright green grains turn blue. To
maximize performance of the filter, dis-
tilled water may be used.
Ready light
The ready light will glow when the
Steam Mop is ready to use.
Steam on demand trigger
Press to release steam.
Maneuverable swivel head
When cleaning in the manual mode,
press the spray trigger to release water
and formula onto the area to be cleaned.
Microfiber mop pads
Reuseable microfiber mop pad is
machine washable and safe for all
hard floor surfaces.
O
perations

Getting ready

The mop pad may have already
come attached to the swivel head,
if not follow steps 1A and 1B
below.
1. Attach mop pad
A. Set swivel head in mop pad, making
sure the drawstring is located on
the back
B. Tighten mop pad by pulling on the
drawstring while pressing on
the toggle.
6
w w w . b i s s e l l . c o m
Tip:
Do not attempt to use
your Steam Mop Max
without water in the tank.
1A 1B