Water Plus; Spin; Without Final Spin; Rinse Hold - Miele W 866 Operating Instructions Manual

The water level increases in soak ,
pre-wash , main wash and/or rinses ,
and / or an extra rinse can be carried
out.
You can choose between four options
for the Water plus button.
The options can be called up through
one of the programmable functions,
(see Water plus system in the Section
on programmable functions).
If an additional option is switched on
(and the indicator light in the button is
lit up), the option can be switched off
by pressing the button. The indicator
light goes out.
A final spin is carried out at the end
of each of the basic programmes, if a
spin speed had been selected.

Without final spin

Interim rinse and spin is carried out in
the relevant programmes.
Washing is not spun after the final rinse,
but the water is drained away, and the
machine goes straight into the
anti-crease stage.

Rinse hold

Interim rinse and spin is carried out
during the programme cycle.
The washing remains suspended in wa-
ter after the final rinse.
This helps to reduce the possibility of
creasing if the washing is left for some
time before being taken out of the ma-
chine.
To continue the programme:
Select the required spin speed with the
Spin button.
The maximum spin speed is automati-
cally limited according to the basic
wash programme chosen, (See
Programme Survey section).
29