Troubleshooting - Miele W 418 Operating Instructions Manual

With the help of the following notes minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
– The programme does not start.
– The wash programme stops and a fault indicator light comes on.
– A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
– The drum door does not open when you press the Door button.
Anti-crease/Finish
Start
Locked
Drain/Spin
36
There is no power.
The system lock has
been activated.
The washing machine
has not been prepared
for using for the first
time.
Check that
– the mains plug is
plugged in and switched
on.
– the fuse or circuit
breaker has not tripped.
Deactivate the system lock.
Prepare the machine as
described in "Before using
for the first time".