Mazda 3 Owner's Manual page 247

Mazda3_8CV6-EA-12H_Edition2 Page247
Wednesday, October 17 2012 3:12 PM
This dial allows variable fan speeds.
0 Fan off
1 Low speed
2 Medium low speed
3 Medium high speed
4 High speed
Mode selector dial
Turn the mode selector dial to select
airflow mode (page 6-4).
NOTE
The mode selector dial can be set at the
l
intermediate positions (
mode. Set the dial to an intermediate
position if you want to slightly adjust the
airflow amount.
For example, when the mode selector dial is
l
at the position between the
positions, airflow from the floor vent is less
than that of the
í
A/C switch
Press the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
Form No.8CV6-EA-12H
) between each
and
position.
Black plate (247,1)
Climate Control System
Press the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function when the
outside temperature approaches 0 °C (32 °F).
Air intake selector
This switch controls the source of air
entering the vehicle.
Press the switch to alternate
between the outside air and recirculated
air modes.
It is recommended that under normal
conditions the switch be kept in the
outside air mode.
Outside air mode (indicator light
turned off)
Outside air is taken into the vehicle. Use
this mode for normal ventilation and
heating.
Recirculated air mode (indicator light
illuminated)
Outside air is shut off. Air within the
vehicle is recirculated.
This mode can be used when driving on a
dusty road or in similar conditions. It also
helps to provide quicker cooling of the
interior.
í
Some models.
Interior Comfort
6-7