Mazda 3 Owner's Manual page 114

Mazda3_8CV6-EA-12H_Edition2 Page114
Wednesday, October 17 2012 3:11 PM
Knowing Your Mazda
Doors and Locks
4. Referring to the auto lock/unlock
function setting table, determine the
function number for the desired setting
and press the unlock side of the driver's
door-lock switch only in the amount of
the selected function number (Ex. If
you select function 2, press the unlock
side of the switch only 2 times).
NOTE
There are only a total of five auto lock/unlock
settings available for automatic transaxle
vehicles, and three for manual transaxle
vehicles. Be sure to press the unlock side of the
driver's door-lock switch the correct number of
times according to the selected function
number. If the switch is mistakenly pressed six
times on an automatic transaxle vehicle or
four times on a manual transaxle, the
procedure will be invalidated. If this occurs,
start the procedure from the beginning.
5. Three seconds after the function setting
has been changed, a beep sound will
beep in the amount of the selected
function number.
3-36
Form No.8CV6-EA-12H
Black plate (114,1)
(Manual transaxle vehicles)
Current Function Number
Press unlock side of
lock switch once
Press lock side of
Function Number 1
lock switch
Press 2 times
Function Number 2 Cancel setting
Press 3 times
Wait for 3 second
Function Number 3
Function set (The
number of beeps
Press 4 times
heard is the same as
the selected function
Cancel setting
number)