Belkin F5L009EA User Manual page 8

Using the Network USB Hub Control Center
What the designations mean
1
Device: Name of the device. You can change the name by
clicking "Properties".
2
Status: Status of the device. The status changes automatically.
3
Connected to this computer: Devices shown are currently
connected to the computer that you are using.
Type: Category of the device. This is detected automatically.
4
Automatically connect: This allows the PC to automatically
connect to this device. This can be enabled or disabled
5
in "Properties".
Hub ID: The ID of the Hub into which the device is plugged.
This is detected automatically.
Not Connected: It is available for you to use. You can
connect to this device by double-clicking the bar or by
clicking "Connect".
uk-6 uk-6