Honda EG2200X Owner's Manual page 25

Spark plug service
Recommended spark plug: BPGES, BPRGES (NGK)
W20EP-U, W20EPR-U (ND)
To ensure proper engine operation, the spark plug must be properly gapped
and free of deposits.
w If the engine has been running, the muffler will be very hot. Be
careful not to touch the muffler.
1. Remove the spark plug cap.
2. Clean any dirt from around the spark plug base.
3. Use the wrench supplied in the tool kit to remove the spark plug.
PLUG CAP
4. Visually inspect the spark plug. Gcard it if the insulator is cracked or
chipped. Clean the spark plug with a wire brush if it is to be reused.
5. Measure the plug gap with a feeler gauge.
The gap should be 0.7-0.8 mm (0.028-0.031 in). Correct as necessary by
carefully bending the side electrode.
0.7-0.8 mm
Kl.O28-0.031 id
23