Ultrabuffer Settings; Lightscribe Settings - Nero 9 Manual

16.4 Ultrabuffer Settings

The following configuration options are available on the Ultrabuffer tab:
Selection list
Method
Input field
Data buffer size

16.5 LightScribe Settings

The following configuration options are available on the LightScribe tab:
Area
Print contrast
Selection list
Default LightScribe drive
Selection list
Genre
Selection list
Current template
Selection list
Default print resolution (DPI)
Check box
Printing LightScribe labels
Defines the memory capacity that Nero Burning ROM
uses as a RAM buffer.
The ultrabuffer is a second memory that enhances the
physical buffer in the recorder.
Defines the memory capacity that can be manually en-
tered.
The input field is only enabled when Manual Configu-
ration is selected in the selection list.
Adjusts the desired print quality.
Selects the drive with the LightScribe recorder.
Specifies the genre.
Defines a template for labels.
Adjusts the desired print resolution.
Enables the option to automatically burn a LightScribe
label.
This tab is only available if a LightScribe recorder has
been installed.
Nero Burning ROM
Configuration Options
85