Nero 9 Manual page 63

7.
If you want to use an existing label:
Select the entry Use Nero CoverDesigner files from the drop-down menu in the Light-
1.
Scribe area.
 The Open browser window is opened.
Select a Nero CoverDesigner file and click the Open button.
2.
 The window is closed and the selected file accepted for this compilation.
8.
If you want to create a label for this compilation:
Select the entry Use label from compilation from the LightScribe area.
1.
The CD Label Editor window is opened.

Create a label.
2.
If you want to change the label you have created, click the Edit button.
3.
The interface in the CD Label Editor window and the procedure for creating la-
bels work on the same principle as Nero CoverDesigner. Please see the Nero
CoverDesigner user manual for full instructions on how to make professional
looking covers and labels.
9.
Set the options you require in the tabs.
10.
Insert a blank LightScribe CD with the data side facing down and click the Burn button.

The burn process starts and the compilation is burned. A progress bar indicates the pro-
gress being made by the burn process. When the burn process is complete the disc is
ejected. A window is opened with the message "Please insert a LightScribe disc into
the drive with the label side facing down".
11.
Insert the blank LightScribe disc into the recorder with the label side facing down and click
OK.

The LightScribe Print Properties window is opened and the print process starts.In the
LightScribe Print Properties window a progress bar indicates the progress being ma-
de. When the print process has finished, a window is opened with the message "Burn
process completed successfully".
12.
Click the OK button.

The disc is ejected. You have printed a LightScribe label.
See also:
 LightScribe Settings 85
Nero Burning ROM
LightScribe
63