Table of Contents
Advertisement
9.3
Printing LightScribe labels (within the project)
To create and print a corresponding LightScribe label within your project, proceed as follows:
1.
In the Recorder section of the extended area in the start screen, select the LightScribe re-
corder you want to use.
2.
Compile a project of your choice.
The Disc Label screen opens.
3.
Create a label according to your requirements.
4.
Click the Next button.
The Final Burn Settings screen opens.
5.
Insert a suitable blank disc in the selected drive.
6.
Select the recorder you want from the Current Recorder drop-down menu.
7.
Add to the desired values in the input fields as necessary and select the required check bo-
xes.
8.
Add to the desired settin
9.
Click the Burn button.
The Burn Process screen appears and the burn process starts. You can follow the pro
cess status in the status bar. As soon as the burn process is finished, the CD/DVD is
ejected and a dialog box appears.
10.
Turn the blank LightScribe disc around, i.e. insert it in the LightScribe recorder with the label
side facing down.
The LightScribe Print Properties window opens and the print process starts. You can
follow
LightScribe dialo
cess.
11.
Click the OK button.
12.
If you would like to save a log of the bu
The log is saved.
13.
To print the log, click the Print button.
The log is printed.
The interface in the Disc Label screen works on the same principle as Nero
CoverDesigner. Basically, it is irrelevant whether you print the label on paper or
directly onto an appropriate disc.
Please see the separate Nero CoverDesigner user manual for full instructions
on how to make professional looking covers and labels.
gs in the extended area.
the process status in the status ba. As soon as the printing is finished, the Nero –
g appears and displays a message about the result of the printing pro-
Nero Express
rn process, click the Save button.
LightScribe
-
42
Advertisement
Table of Contents
