Nautilus Sport Series Assembly Manual page 18

bASe ASSembly guide
Figure 6: step 6 securing Console Assembly
AssEMBLy guiDE

step 6: securing the right side on Console Assembly
Locate the following for this step:
Parts:
hex head Bolt
Flat Washer
Hardware:
star Washer
tools:
6-1 Fasten console onto right Upright support using 3
6-2 tighten all bolts on the right side securely,
• assembly from step 5
• 3 Hex Head Bolts (5/16 - #18 x 1)
• 3 Flat Washers (5/16) - 1/2 inch outer diameter
• 3 star Washers (5/16)
• 1/2 inch socket with ratchet (not provided)
bolts, 3 flat washers and 3 star washers.
imPORtANt!
including Upright support bolts installed in step 1 .
mAKe SuRe thAt
the StAR WASheR iS
Ne X t tO the uPRight
SuPPORt DuRiNg
iNStAll AtiON. See
hARDWARe StAcK iN
FiguRe 6.