Mazda 3 Manual page 437

Mazda3_8BY6-EA-11F_Edition1 Page437
Wednesday, June 15 2011 2:2 PM
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of removal.
qReplacing Interior Light Bulbs
Overhead light (Front)/Map lights,
Overhead light (Rear), Vanity mirror
í
lights
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.
2. Disconnect the bulb by pulling it out.
Overhead light (Front)/Map lights
Form No.8BY6-EA-11F
Black plate (437,1)
Owner Maintenance
Overhead light (Rear)
Edge
í
Vanity mirror lights
3. Install the new bulb in the reverse order
of removal.
Trunk light (4 Door)
1. Press both sides of the lens cap to
remove it.
í
Some models.
Maintenance and Care
8-55