Mazda 3 Manual page 276

Mazda3_8BY6-EA-11F_Edition1 Page276
Wednesday, June 15 2011 2:1 PM
Interior Comfort
Audio System
(Programming with "text" display (e.g.
channel name))
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR (bank number)
(e.g. channel name))]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the text (e.g. channel name)
flashes. Then, [SR
is displayed and you will hear beep
sound at the same time.
3. SR (bank number)
number) (channel number)] are
displayed.
4. Three seconds later, it returns to normal
display. [SR (bank number)
(e.g. channel name))]
NOTE
Six stations can be stored in each bank, SR1,
SR2, and SR3 for convenient access to your
favorite stations.
Preset channel call-up
Press and release the channel preset
button,
[SR (bank number)
number) (channel number)] appears.
When the preset button is pressed during
text mode, its channel number is
displayed first for three second and then
its text is displayed.
NOTE
In the initial setting, all channels are preset to
184.
6-38
Form No.8BY6-EA-11F
Category change
Press the category button (
select the desired category.
(selected text
Every time the category button ( ) is
pressed, the category is changed over in
the order shown below.
At this time, the lowest (smallest-number)
channel within the category indicated is
(bank number)]
received.
When the highest (or lowest) category is
reached, the category is changed over in
the order shown below.
CH (preset
Highest category → All categories →
Lowest category
NOTE
While all categories are selected, all channels
(text
covering a category can be accessed
(Category off condition).
Channel selection within a category
If you are in a selected category and the
channel number is displayed, turning the
manual tuning dial moves the channel
number up/down in that category.
CH (preset
NOTE
The channel number needs to be indicated in
the display to use manual tuning dial for this
function.
Black plate (276,1)
Press the category button ( ):
l
Category up
Press the category button ( ):
l
Category down
Turn the manual tuning dial clockwise:
l
Channel Up
Turn the manual tuning dial
l
counterclockwise: Channel Down
or ) and