Mazda 3 Manual page 304

Mazda3_8BY6-EA-11F_Edition1 Page304
Wednesday, June 15 2011 2:2 PM
Interior Comfort
Bluetooth Audio
2. Press the audio control dial to
determine the mode.
After ENTER PIN is displayed on
the information display for three
seconds, PIN 0000 is displayed and
the PIN code can be input.
3. Input the PIN code of your Bluetooth
audio device by pressing channel
preset buttons 1 to 4 while PIN 0000
is displayed.
Press channel preset button 1 to input
the first digit, 2 for the second, 3 for
the third, and 4 for the forth. For
example, if the PIN code were 4213 ,
press channel preset button 1 four
times (1, 2, 3, 4), button 2 twice (1, 2),
button 3 once (1), and button 4 three
times (1, 2, 3). If the PIN 0000
display disappears before finishing the
PIN code input, repeat the procedure
from Step 1.
NOTE
Some devices accept only a particular pairing
code (Usually, 0000 or 1234 ).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and try
those numbers if necessary.
4. Press the audio control dial while the
input PIN code is displayed.
PAIRING flashes on the display.
5. Operate the Bluetooth audio device and
set it to the program mode while
PAIRING is flashing.
6. When the programming is completed,
and PAIR SUCCESS are
displayed after about 10-30 seconds,
after which PAIR SUCCESS
continues to be displayed for three
seconds, and then the unit returns to the
normal display.
6-66
Form No.8BY6-EA-11F
Black plate (304,1)
NOTE
Some Bluetooth audio devices need a
l
certain amount of time before the
symbol is displayed.
If the programming failed, Err flashes
l
for three seconds.
Programming cannot be performed while
l
the vehicle is moving. If you attempt to
perform programming while the vehicle is
moving, PAIR DISABLE is displayed.
If seven Bluetooth audio devices have
l
already been programmed to the vehicle,
programming cannot be performed and
MEMORY FULL is displayed. Delete
one programmed device to program
another one.
Programming a Bluetooth audio device
which does not have a four-digit PIN
code
1. Using the audio control dial, select the
pairing program mode
PAIR DEVICE in the BT SETUP
mode. (Refer to
Bluetooth audio set up for details.)
2. Press the audio control dial to
determine the mode.
After ENTER PIN is displayed on
the information display for three
seconds, PIN 0000 is displayed and
the PIN code can be input.
3. Press the audio control dial while
PIN 0000 is displayed.
PAIRING flashes on the display.
4. Operate the Bluetooth audio device and
set it to the program mode while
PAIRING is flashing.
5. As the Bluetooth audio device requires
a PIN code, input 0000 .