Troubleshooting; The Programme Does Not Start - Miele W 460 WPS Operating Instructions Manual

Honeycomb care
Table of Contents

Advertisement

With the help of the following notes minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.

– The programme does not start.

– The wash programme stops and a fault indicator light comes on.
– A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
– The drum door cannot be opened by pressing the Door button.
Anti-crease/Finish
Drain/Final spin
38
There is no power.
locked
The system lock has been
activated.
The washing machine has
not been prepared for
using for the first time.
Check that
– the mains plug is
plugged in.
– the fuse or circuit
breaker has not
tripped.
Deactivate the system
lock.
Prepare the machine as
described in "Before
using for the first time".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents