Miele W 308 Operating Instructions Manual page 38

Check drain
Check inlet
Excess detergent
Main wash
Anti-crease/Finish
A To switch off the fault indicator: Switch off the machine with the I-On/0-Off button
and turn the programme selector to Finish
38
The drain outlet is
restricted.
The water inlet is
restricted.
The filter in the inlet
hose is dirty.
Excessive foam has
built up during
washing.
There is a fault.
The position of the programme selector was altered
after the start of the programme. Turn the
programme selector back to the programme
previously chosen.
Clean the fluff (drain) filter
and drain pump.
Check whether
– the stopcock is opened
wide enough.
– the inlet hose is kinked.
Clean the filter.
Use less detergent next
time and follow the
recommendation on the
packaging.
Start the programme again.
If the fault indicator occurs
again, contact the Service
Dept.
A