Miele W 308 Operating Instructions Manual page 37

Check drain
Check inlet
Check inlet
Check drain
Soak/Pre-wash
Rinses
A To switch off the fault indicator: Switch off the machine with the I-On/0-Off button
and turn the programme selector to Finish
The water outlet is
blocked.
The drain hose has been
fixed too high.
The water inlet is blocked. Open the stopcock.
The filter in the water inlet
hose is dirty.
The water protection
system has reacted.
There is a fault.
A
Clean the fluff (drain)
filter and drain pump.
The maximum drain
height is 1 m.
Clean the filter.
Call the Service
Department.
Start the programme
again.
If the fault indicators
occur again, contact the
Service Department.
37