Select And Load A Program - Lexicon MX300 User Manual

MX300
6. Turn up the Aux Return 1 and 2 to the 12 o'clock position, or stereo line input
faders to the 0dB position, if you used that connection.
7. To increase or decrease the amount of effect on the signal, adjust the Aux Send
level on the channel that you want affected.

select and load a Program

Turn the Program/Load knob to choose a program. The Program Number
Display flashes the number of the program to be loaded. Press the knob to load the
program.
Note that the MX300 comes with 99 Factory programs and 99 User programs. Factory
and User LED's to the left of the Program Number Display window indicate
whether the displayed program is a Factory or User program. For more information
about editing programs, see page 13.
Program/Load knob
Program Number Display
Quick Start
3