Declaration Of Conformity - Lexicon MX300 User Manual

IMPORTANT SAFETY INSTRUCTIONS
WARNING FOR YOUR PROTECTION
READ THE FOLLOWING:
KeeP TheSe INSTRUCTIONS
heeD ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
the apparatus shall not be exposed to dripping or splashing liquid and no
object filled with liquid, such as vases, shall be placed on the apparatus.
CLeAN ONLY WITh A DRY CLOTh.
DO NOT BLOCK ANY OF The VeNTILATION OPeNINGS. INSTALL IN
ACCORDANCe WITh The MANUFACTUReR'S INSTRUCTIONS.
DO NOT INSTALL NeAR ANY heAT SOURCeS SUCh AS RADIATORS, heAT
ReGISTeRS, STOVeS, OR OTheR APPARATUS (INCLUDING AMPLIFIeRS)
ThAT PRODUCe heAT.
ONLY USe ATTAChMeNTS/ACCeSSORIeS SPeCIFIeD BY The
MANUFACTUReR.
UNPLUG ThIS APPARATUS DURING LIGhTNING STORMS OR WheN
UNUSeD FOR LONG PeRIODS OF TIMe.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or third prong are provided for your safety. If the provided
plug does not fit your outlet, consult an electrician for replacement of
the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Use only with the cart stand, tripod bracket, or table specified by the
manufacture, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
Refer all servicing to to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
POWeR ON/OFF SWITCh: The Power switch used in this piece of
equipment DOeS NOT break the connection from the mains.
MAINS DISCONNeCT: The plug shall remain readily operable. For
rack-mount or installation where plug is not accessible, an all-pole mains
switch with a contact separation of at least 3 mm in each pole shall be
incorporated into the electrical installation of the rack or building.
If connected to 240V supply, a suitable CSA/UL certified power cord shall
be used for this supply.
This equipment is intended for rack mount use only.

DECLARATION OF CONFORMITY

Manufacturer's Name:
Manufacturer's Address:
declares that the product:
Product name:
Note: Product name may be suffixed by the eU.
Product option:
conforms to the following Product Specifications:
Safety:
eMC:
Supplementary Information:
The product herewith complies with the
requirements of the:
Low Voltage Directive 2006/95/eC
eMC Directive 2004/108/eC.
RohS Directive 2002/95/eC
Weee Directive 2002/96/eC
With regard to Directive 2005/32/eC
and eC Regulation 1275/2008 of 17
December 2008, this product is designed,
produced, and classified as Professional
Audio equipment and thus is exempt from
this Directive.
Roger Johnsen
Director, engineering
Signal Processing
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: January 26, 2011
european Contact: Your local Lexicon Sales and Service
Office or
harman Signal Processing
8760 South Sandy Parkway
Sandy, Utah
84070 USA
Ph: (801) 566-8800
Fax: (801) 568-7583
Lexicon Professional
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Lexicon MX300
None
IeC 60065 -01+Amd 1
eN 55022:2006
eN 55024:1998
FCC Part 15