Behringer VINTAGE TIME MACHINE VM1 User Manual

Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE TIME MACHINE VM1. This high-quality classic
effect delivers true analog delay with up to 450 ms of organic echo to rival any tape delay, vibrant chorus and mind-bending vibrato.
1. Controls
The SERIAL NUMBER is located on the underside.
Use the 9 V_ connection to plug in a 9 V power supply.
{1}
Use the POWER switch to activate/deactivate the unit.
{2}
The POWER LED lights up when the unit is activated.
{3}
For our current warranty terms, please refer to our website at http://www.behringer.com.
4. Specifications
In
Connector 1/4" TS
Impedance 100 kΩ
EffECt Out
Connector 1/4" TS
Impedance 1 kΩ

DIrECt Out

Connector 1/4" TS
Impedance 100 kΩ
VINTAGE TIME MACHINE VM1
The 1/4" TS
{4}
your amp.
The 1/4" TS
{5}
direct, unaffected signal to feed for example a separate
guitar amp.
Use this 1/4" TS
{6}
cable.
The CHORUS/VIBRATO switch selects between chorus or
{7}
vibrato effect.
The LEVEL control adjusts the input level. The LEVEL control
{8}
adjusts the input level.
The OVERLOAD LED illuminates when the input signal is
{9}
too high. In this case reduce the input level with the LEVEL
control.
The MIX control adjusts the balance between the effect signal
[10]
and the direct signal.
The FEEDBACK control determines the amount of signal
[11]
repetitions. Since the output signal is fed back to the input
of the delay line, it is possible to generate a self oscillation
at high settings of this control.
The DELAY control adjusts the time between the direct signal
[12]
and the signal repetitions (Delay Time).
The CHORUS/VIBRATO control adjusts the effects speed
[13]
of the modulation effect added to the delay. Slow settings
produce a chorus effect while fast settings provide vibrato.
Use the footswitch to activate/deactivate the effect.
[14]
2.

Sample settings

3. Warranty
POWEr SuPPLY
Power supply
Power connector
Power consumption
Dimensions (H x W x D)
Weight
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modifications may be made from time to time to existing
products without prior notice. Specifications and appearance may therefore differ from
those listed or shown.
Specifications
EFFECT OUT connector sends the signal to
DIRECT OUT connector always provides the
INPUT connector to plug in the instrument
9 V_, 100 mA (included)
BEHRINGER PSU-SB
2 mm jack, negative center
50 mA
approx. 61 mm (2 2/5")
x 200 mm (7 4/5")
x 172 mm (6 4/5")
approx. 1.07 kg (2.37 lbs)
3