Built Under Installation Requirements - Baumatic BMM201SS Instruction Manual

o Ensure that the rear panel of the furniture housing unit has been
removed.
o You must ensure that there
through. These steps must be done before commencing the rest
of the installation process.
o This oven may be installed without any additional ventilation cut
outs being made in the housing unit. Howeve
shown in the diagram MUST be present, otherwise the
microwave oven may not function correctly.
o Do not cover the ventilation slots or

Built under installation requirements

I MPORTANT: NO OTHER METHODS OF BUILDING UNDER THE
MICROWAVE ARE SANCTIONED BY BAUMATIC.
The rear wall of the housing unit MUST be removed to allow
o
there to be the correct amount of ventilation.
is a hole to feed the electrical cable
r the ventilation cut
air intake points.
30