Overriding The Child Safety Lock; Safety Cut-Out - AEG D-90327 Installation And Operating Instructions Manual

Electrolux ceramic hob installation and operating instructions
Table of Contents

Advertisement

Overriding the child safety lock

The child safety device can be released in this way for a single cooking
session; it remains activated afterwards.
Step
1.
2.
Until the appliance is next switched off, it can used as normal.

Safety cut-out

Cooking surface
• If after switching on the appliance a heat setting is not set for a
cooking zone within approx. 10 seconds, the appliance automatically
switches itself off.
• If one or more sensor fields are touched for longer than approx. 10
seconds, the cooking surface is automatically switched off. ER03
flashes on the display or changes to h if there is still residual heat.
• If all cooking zones are switched off, the cooking surface automati-
cally switches itself off after approx. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel
switches all cooking zones off.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically. h is displayed.
Heat setting
1 - 2
3 - 4
5
6 - 9
10
Control panel
Switch on the appliance
Touch
of the front right
cooking zone and
same time
Switches off after
6 hours
5 hours
4 hours
1.5 hours
l
h
/
(if hot)
¾
4 x
Decimal points flash
at the
Display

Advertisement

Table of Contents
loading

This manual is also suitable for:

6410kf

Table of Contents