Balanced Audio Technology VK-60SE Owner's Manual

Balanced Audio Technology VK-60SE Owner's Manual

Special edition balanced power amplifier

Advertisement

WARRANTY REGISTRATION FORM

Unit Serial Number: _______________________________________
Customer Name:
Address:
Date of Purchase:
Purchased From:
Dealer Name:
Address:

IMPORTANT NOTE:

In order to receive the full five year product warranty, please mail this
completed form together with a copy of your sales receipt to Balanced Audio
Technology at the address below, within thirty days of purchase.
Failure to do so will result in the product being warrantied for one year
from the date of manufacture.
1300 First State Blvd. Suite A W ilmington DE, 19804
VK-60SE
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
Tel: 302-999-8855 Fax: 302-999-8818

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VK-60SE and is the answer not in the manual?

Questions and answers

Summary of Contents for Balanced Audio Technology VK-60SE

  • Page 1: Warranty Registration Form

    IMPORTANT NOTE: In order to receive the full five year product warranty, please mail this completed form together with a copy of your sales receipt to Balanced Audio Technology at the address below, within thirty days of purchase. Failure to do so will result in the product being warrantied for one year from the date of manufacture.
  • Page 2 VK-60SE Special Edition Balanced Power Amplifier Owner's Manual 1300 First State Blvd. Suite A W ilmington, DE 19804 Tel: 302-999-8855 Fax: 302-999-8818...
  • Page 3: Package Contents

    Introduction Thank you for your purchase of the Balanced Audio Technology VK-60SE power amplifier. Please read this owner’s manual to obtain the full benefit of the VK-60SE in your system. This manual provides you with necessary safety information and operating procedures for this exceptional unit.
  • Page 4: Installing Tubes

    Installing Tubes 1. Install the six 6SN7 tubes in the positions V1 through V6 2. Install the four 6C33C-B output tubes into positions V9 through V12 3. Install the two 6H30 SuperTubes into posiitons V7 and V8 4. Install the two 6V6 tubes into positions V13 and V14...
  • Page 5: Physical Placement

    LOW, MEDIUM and HIGH for connecting a variety of speakers to the VK-60SE. Please note that some experimentation may be required. Try each output tap until you find the one that gives the most balanced performance in your system.
  • Page 6 Operating the VK-60SE Normal operation of the VK-60SE requires simply turning the unit on. There are no meters to connect, bias setpoints to remember, or drifting bias points to adjust. Please read the Autobias Feature section for more details. Turning the VK-60SE On: The power switch is located at the rear of the unit.
  • Page 7 In order to replace the 6C33C-B output tubes, please contact the factory and supply them with the unique identification number stamped on the side of the tube needing replacement. This information will be used by Balanced Audio Technology to provide an optimal replacement tube for your amplifier.
  • Page 8 Servicing: The Balanced Audio Technology VK-60SE should require no service other than tube replacement to maintain its high performance. Please direct any further service inquiries to the factory. Cleaning: To remove dust, occasionally wipe the front and top surfaces of your VK-60SE with a damp soft cloth.
  • Page 9 If this product contains a materials, manufacturing, or workmanship defect that cannot be repaired at the dealership where the product was purchased, it must be packed in original packaging and returned to Balanced Audio Technology via insured freight, at the owners expense. If replacement packaging materials are required, they will be supplied by the factory at a nominal charge.

Table of Contents