Balanced Audio Technology VK-6200 Owner's Manual

Balanced Audio Technology VK-6200 Owner's Manual

Multi-channel power amplifier

Advertisement

WARRANTY REGISTRATION FORM

Unit Serial Number: _______________________________________
Customer Name:
Address:
Date of Purchase:
Purchased From:
Dealer Name:
Address:

IMPORTANT NOTE:

In order to receive the full five year product warranty, please mail this
completed form together with a copy of your sales receipt to Balanced Audio
Technology at the address below, within thirty days of purchase.
Failure to do so will result in the product being warrantied for one year
from the date of manufacture.
1300 First State Blvd. Suite A W ilmington, DE 19804
VK-6200
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
Tel: 302-999-8855 Fax: 302-999-8818

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VK-6200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Balanced Audio Technology VK-6200

  • Page 1: Warranty Registration Form

    IMPORTANT NOTE: In order to receive the full five year product warranty, please mail this completed form together with a copy of your sales receipt to Balanced Audio Technology at the address below, within thirty days of purchase. Failure to do so will result in the product being warrantied for one year from the date of manufacture.
  • Page 2 VK-6200 Multi-Channel Power Amplifier Owner's Manual 1300 First State Blvd. Suite A W ilmington, DE 19804 Tel: 302-999-8855 Fax: 302-999-8818...
  • Page 3 Introduction Thank you for your purchase of the Balanced Audio Technology VK-6200 balanced power amplifier. Please read this owner's manual to obtain the full benefit of the VK-6200 in your system. It will provide you with the needed safety information and operating procedures for this exceptional unit.
  • Page 4: Important Notes

    However, the VK-6200 is designed to accept either balanced or single-ended inputs. Each channel of VK-6200 has two input connectors – one XLR for balanced connections, and one RCA for use with single-ended interconnects. Input selector switch allows you to select the right input connector for your application.
  • Page 5 Operating the VK-6200 Turning the VK-6200 On: The power switch is located in the center of the front panel of the VK-6200. Pressing on the top of switch bar will turn the unit ON and OFF, provided the VK-6200 is not in its Standby mode (see below for operation in Standby mode).
  • Page 6 Green Standby Indicator: The green indicator comes ON when the unit is in its Standby mode. In this case, pressing the POWER switch will make the unit alternate between OFF and Standby states. NOTE: VK-6200 is automatically switched into its Standby mode when a remote control plug is installed in the Remote IN jack on the back panel.
  • Page 7 Remote Control Connectors: The VK-6200 is equipped with Remote IN and OUT connectors mounted on its back panel. These allow the amplifier be turned ON remotely from any controller equipped with +12V trigger signal output. The external +12V trigger voltage should be applied to the Remote IN connector (see above on the proper way to wire the remote control plug).
  • Page 8 Servicing The Balanced Audio Technology VK-6200 does not require periodic service to maintain its high performance. In case of malfunction, (when replacing fuses fails to eliminate the problem) please direct any further service inquiries to the factory. Cleaning To remove dust, occasionally wipe the front and top surfaces of your VK-6200 with a damp soft cloth.
  • Page 10: Five Year Limited Warranty

    If this product contains a materials, manufacturing, or workmanship defect that cannot be repaired at the dealership where the product was purchased, it must be packed in original packaging and returned to Balanced Audio Technology via insured freight, at the owners expense. If replacement packaging materials are required, they will be supplied by the factory at a nominal charge.

Table of Contents