Honda Civic Owner's Manual page 313

BULB
SOCKET
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
5. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
6. Test the lights to make sure the
new bulb is working.
7. On all EX-L, Canadian SE, and Si
models
Push the trunk lid trim back into
position.
8. Put the fasteners into the holes on
the trunk lid trim. Reinstall the
screws.
Replacing a High-mount Brake
Light Bulb
SOCKET
Except Si model
1. Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
3. Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Lights
BULB
307