ECS A880GM-M6 User Manual page 47

HT Frequency (Auto)
This item enables users to manually set up the HyperTransport frequency. If
Manual,the HT Frequency Value will display, and the options are 200 MHz, 400
MHz, 600MHz, 800 MHz and 1000 MHz.
CPU/HT Reference Clock (MHz) (200)
Use this item to set the CPU/HT Reference Clock through clock gen.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Voltage (Disabled)
This item allows users to adjust the CPU voltage.
DIMM Voltage (Disabled)
This item allows users to adjust the DIMM voltage.
Incorrectly doing overclock/overvoltage may result in damage to CPU,
chipset, or memory and reduce the useful life of these components. This
function is for advanced users only and we recommend you not to alter
the default settings to prevent system instability or other unexpected results.
(Enable for AM2+ / Disable for AM2)
NB Voltage (+50mV)
This item allows users to adjust the Northbridge voltage.
SB Voltage (1.20V)
This item allows users to adjust the Southbridge voltage.
AMD Athlon (tm) II x2 250 Processor
This is display-only field and displays the information of the CPU installed in your
computer.
NB CLK (2000 MHz)
This item shows the frequency of Northbridge clock.
Physical/Logical Count (1/4)
This item shows the physical/logical count.
Current CPU Frequency (3000 MHz)
This item indicates the current CPU frequency. Users can not make any change
tothis item. Please noted that the frequency will be varied with different CPU.
Current CPU Voltage (1.3250v)
This item indicates the current CPU voltage.
Current NB Frequency (2000 MHz)
This item indicates the current NB frequency.
DIMM Voltage Default (1.60v)
This item indicates the current NB frequency.
NB Voltage Default (1.15v)
This item indicates the NB voltage default value.
SB Voltage Default (1.20v)
This item indicates the SB voltage default value.
Press <Esc> to return to the main menu setting page.
Using BIOS
43