Important Safety Instructions - Krell Industries S-1500 Instructions For Use Manual

S –1500
Multi-channel Amplifier
Instructions for Use
v 07.0
CONTACT
INFORMATION
Go to website
This product complies with the
EMC directive (89/336/EEC)
and the low-voltage directive
(73/23/EEC).
2007 by Krell Industries, Inc. All rights reserved
©
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-298-4000
FAX 203-891-2028
E-MAIL krell@krellonline.com
WEBSITE http://www.krellonline.com

IMPORTANT SAFETY INSTRUCTIONS

1. Read Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
8. Unplug this apparatus during lightning storms or when unused for long
periods of time.
9. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
10. The S–1500 amplifier must be placed on a firm, level surface where it is
not exposed to dripping or splashing.
11. The ventilation grids on the top and bottom of the S–1500 amplifier must
be unobstructed at all times during operation. Do not place flammable
material above or beneath the S–1500 amplifier.
12. Before making connections to the S–1500 amplifier, ensure that the power
is off and other components are in mute or stand-by mode. Make sure all
cable terminations are of the highest quality, free from frayed ends, short
circuits, or cold solder joints.
13. THERE ARE NO USER SERVICEABLE PARTS INSIDE AN S–1500
AMPLIFIER.
Please contact Krell if you have questions not addressed in this guide.
This product is manufactured in the United States of America. Krell
Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents.
Krell Current Mode™ is a trademark of Krell Industries, Inc. All other trademarks and tradenames are reg-
istered to their respective companies.
® is a registered trademark of Krell
P/N 309582-W