Ambience Effect Block - Korg Toneworks AX1500G Owner's Manual

4. Appendices

AMBIENCE effect block

These are reverberation-type effect models such as delay, reverb,
and echo.
AMBIENCE
ECHO PLUS
MULTI HEAD ECHO
STEREO DELAY
PING PONG DELAY
ROOM
HALL
PLATE
SPRING
ECHO+ROOM
ECHO+HALL
ECHO+PLATE
Tape echo simulator
This effect model simulates the characteristic tape echo effect
produced by recording sound on analog magnetic tape and
playing it back from a playback head located at a slight distance
from the recording head.
ECHO PLUS
This simulates a tape echo. Pitch discrepancies produced by
unevenness in the rotational speed, and the distortion and loss
of audio quality due to the magnetic tape are also simulated.
Knob 1 TIME Adjusts the delay time.
Knob 2 FEEDBACK Adjusts the feedback amount (delay repeats).
Knob 3 TONE Adjusts the tonal quality of the echo.
Knob 4 ——— ————
Knob 5 MIX Adjusts the mix amount of the echo.
MULTI HEAD ECHO
This simulates a tape echo with four playback heads. The
distortion and loss of audio quality due to the magnetic tape
are also simulated.
Knob 1 TIME Adjusts the delay time.
Knob 2 FEEDBACK Adjusts the feedback amount (delay repeats).
Knob 3 TONE Adjusts the tonal quality of the echo.
Knob 4 ECHO 1: Conventional echo.
2:
3:
4:
5:
Knob 5 MIX Adjusts the mix amount of the echo.
Delay
STEREO DELAY
A stereo delay with a time difference between the left and right
channels adds a spacious feeling.
PING-PONG DELAY
This is a stereo delay where the sound bounces between the
left and right channels.
Knob 1 TIME Adjusts the delay time.
Knob 2 FEEDBACK Adjusts the feedback amount (delay repeats).
Knob 3 TONE Adjusts the tonal quality of the delay.
Knob 4 ——— ————
Knob 5 MIX Adjusts the mix amount of the delay.
22
Knob 1
TIME
60[mS]...3[SEC]
180[mS]...3[SEC]
0[mS]...3[SEC]
0[mS]...3[SEC]
1...10
1...10
1...10
1...10
0[mS]...2[SEC]
0[mS]...2[SEC]
0[mS]...2[SEC]
"ECHO+"
"MH ECHO"
The delayed sound produces a
rhythm of "ta-ta-ta (rest)."
The delayed sound produces a
rhythm of "ta (rest) ta-ta."
The delayed sound produces a
rhythm of "ta-ta (rest) ta."
The delayed sound produces a
rhythm of "ta-ta-ta-ta."
"ST DLY"
"PP DLY"
Knob 2 Knob 3
FEEDBACK TONE
0...10 1...10
0...10 1...10
0...10 1...10
0...10 1...10
— 1...10
— 1...10
— 1...10
— 1...10
0...10 1...10
0...10 1...10
0...10 1...10
Reverb
This effect model simulates the reverberation of a room or
concert hall, or the reverberation produced by a plate or spring
reverb device.
ROOM
This simulates the reverb of small studio-sized rooms to
medium-sized rooms such as a garage.
HALL
This simulates the reverberation of medium-sized halls to large
halls.
PLATE
This simulates a plate reverb device.
SPRING
This effect model simulates the spring reverb devices built into
guitar amps etc.
Knob 1 TIME
Knob 2 ———
Knob 3 TONE
Knob 4 ———
Knob 5 MIX
ECHO+ROOM
This is a dual effect model that lets you simultaneously use
both a room reverb and a stereo delay.
ECHO+HALL
This is a dual effect model that lets you simultaneously use
both a hall reverb and a stereo delay.
ECHO+PLATE
This is a dual effect model that lets you simultaneously use
both a plate reverb and a stereo delay.
Knob 1 TIME
Knob 2 FEEDBACK Adjusts the feedback amount (delay repeats).
Knob 3 TONE
Knob 4 ECHO
Knob 5 REVERB
Knob 4
ECHO MIX/REVERB
—
1, 2, 3, 4, 5
—
—
—
—
—
—
0...10
0...10
0...10
"ROOM"
"HALL"
"PLATE"
"SPRING"
Adjusts the length of reverb.
————
Adjusts the tone of the reverb.
————
Adjusts the mix amount of the reverb.
"ECHO RM"
"ECHO HL"
"ECHO PL"
Adjusts the delay time.
Adjusts the tone of the delay sound.
Adjusts the mix amount of the delay
sound.
Adjusts the mix amount of the reverb.
Knob 5
0...10
0...10
0...10
0...10
0...10
0...10
0...10
0...10
0...10
0...10
0...10