Cabinet Effect Block - Korg Toneworks AX1500G Owner's Manual

CABINET effect block

The shape of the cabinet and the type and number of speakers
are very important elements in determining the tonal character
of a guitar amp.
The CABINET effect block provides models that faithfully
simulate the cabinet and speaker characteristics of a variety of
guitar amps, from vintage to modern.
Although these models are especially effective when you are
plugged in to a mixer etc. via a direct line connection, they are
also effective when you are using a guitar amp.
CABINET
1x8 TWEED
1x12 TWEED
1x12 BLACK PANEL
1x12 AC15
2x12 BLACK PANEL
2x12 AC30
2x12 CLASS A
4x10 TWEED
4x12 CLASSIC
4x12 VINTAGE
4x12 MODERN
1x8 TWEED "1–8 TWD"
This model simulates an open back cabinet with one 8-inch
speaker.
1x12 TWEED "1-12 TWD"
This model simulates an open back cabinet with one 12-inch
speaker typically used for blues.
1x12 BLACK PANEL "1-12 BLK"
This model simulates an American open back cabinet with one
12-inch speaker and a bright tonal character.
1x12 AC15 "1-12AC15"
This model simulates a Vox open back cabinet with one 12-inch
"Blue" speaker.
2x12 BLACK PANEL "2-12 BLK"
This model simulates an American open back cabinet with two
12-inch speakers.
2x12 AC30 "2-12AC30"
This model simulates a Vox open back cabinet with two 12-
inch "Blue" speakers.
2x12 CLASS A "2-12 CLA"
This model simulates a modern open back cabinet with two 12-
inch speakers.
4x10 TWEED "4-10 TWD"
This simulates an open back cabinet with four 10-inch
speakers.
4x12 CLASSIC "4-12 CLS"
This simulates a closed back cabinet with four 25W 12-inch
speakers.
4x12 VINTAGE "4-12 VIN"
This simulates a closed back cabinet with four 30W 12-inch
speakers.
4x12 MODERN "4-12 MDN"
This simulates a closed back cabinet with four 75W 12-inch
speakers.
Knob 1 Knob 2
AIR LEVEL
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
AP, 0.3...9.7, Ln 1...10
Knob 3
PRESENCE
0...10
0...10
0...10
0...10
0...10
0...10
0...10
0...10
0...10
0...10
0...10
Knob 1 AIR This simulates the resonance of the
cabinet, and the comb filtering effect
produced by interference between the
speakers.
Decreasing this value will produce a
sound that is more suitable for connection
to a guitar amp. Increasing this value will
produce a sound that is more suitable for
direct-line connection.
Knob 2 LEVEL Adjusts output level.
Knob 3 PRESENCE Adjusts tone of the high-frequency range.
If the sound distorts, slightly lower the LEVEL and
PRESENCE.
Knob 4 Knob 5
17