KEY BOARD
1.SOURCE
To display the input source menu.
2.MENU
To display main MENU.
3.CH+/CH-
In TV mode to change the channel up
and down.
In MENU mode, to select the menu items .
In standby mode, it can turn on the TV.
4.VOL+/VOL-
To adjust sound level.
In MENU mode,to select the menu items.
REAR PANEL
µ ç Ô ´ Ê ä È ë
All the terminals are(from left to right):
AC POWER SOCKET, HDMI input,VGA ,YPbPr input,AV,Rear Audio input,PC AUDIO input,
ANTENNA SOCKET.
Note: 1.AV and YPbPr share the Rear Audio input channel.
2. When HDMI port get DVI signal ,the audio signal receives from the PC Audio channel.
SOURCE
MENU
CH+
CH-
VOL+
VOL-
DVD SIDE PANEL
Disc label side
USB
In DVD mode when no disc is playing, insert
a USB drive (or an MP3 player with USB
interface) into the USB socket. Press the
DVD/USB button on the Remote Control unit,
and use the /
playing MP3 or JPEG files.
3 in 1 Card Reader
In DVD mode when no disc is playing, insert
three kinds of card (SD ,MMC, MS). Press
DVD/USB button on the Remote control
and use the /
mode for playing MP3 or JPEG files. All the
function is the same to playing a disc.
Caution:
When using USB/3 in 1 Card Reader
function, please do not insert in the wrong
direction, or else it will damage the unit.
×ó
ÓÒ
-6-
INSTALLATION
OPEN/CLOSE
PLAY/PAUSE
STOP
PREV
NEXT
Disc data side facing you
SD/MMC/MS
USB
keys to select USB mode for
key to select SD/MS/MMC