Procedure 4 Diagnostic Test Program Execution Check - Toshiba Satellite L640D Maintenance Manual

Chapter 2 Troubleshooting Procedures
Procedure 4 Diagnostic Test Program Execution Check
The HDD/SSD test program is stored in the Diagnostics Disk. Perform all of the HDD/SSD
tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more
information about the HDD/SSD test program.
If an error is detected during the HDD/SSD test, an error code and status will be displayed.
The error codes and statuses are described in Table 2-5-1. If an error code is not displayed
but the problem still occurs, go to Procedure 5.
Code
01
02
04
05
07
09
0A
0B
10
11
20
40
80
AA
BB
CC
E0
F0
??
Satellite L600D/L640D/L645D, Satellite Pro L600D/Pro L640D/Pro L645D Maintenance Manual (960-Q08)
Bad Command Error
Bad Address Mark Error
Record Not Found
HDC Not Reset Error
Drive Not Initialized
DMA Boundary Error
Bad Track Error
ECC Recover Enabled
Time Out Error
Drive Not Ready
Undefined Error
No Sense Error
Table 2-5-1 HDD/SSD error code & status
Status
Bad Sector
ECC Error
HDC Error
Seek Error
Write Fault
Status Error
Other Error