The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use. EN-1 Haier LCD HDTV...
Energy Star compliant By being Energy Star compliant you are assured that your Haier model is helping the environment by using less energy while saving you money. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.
SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
Select the desired program ..........15 Select the desired sound..........15 Mute..................15 Video menu ............15 How to select picture mode........... 15 How to customize your own picture status....16 PC Set..................17 Audio menu............17 How to select audio mode..........17 Haier LCD HDTV EN-4...
Press to turn on and off the TV. Do not put anything near the sensor, which may block the remote control signal. Connect a USB flash drive to view MPEG2 videos, 6 USB input JPEG images or listen to MP3 songs. EN-5 Haier LCD HDTV...
Connect the audio L/R cables to your audio equipment. Connect the audio L/R cables from a computer PC Audio In to this jack. Connect a video cable from a computer to this PC Video In jack. Haier LCD HDTV EN-6...
Press again to return to the program. Q CH.LIST Open the channel list in TV. R FAV.LIST Press to open the favorite channel list in TV. S ARC(Aspect Ratio Control) Press to change the aspect ratio. EN-7 Haier LCD HDTV...
If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter” in the connections. To install the antenna properly please contact a professional in your area. Note All cables shown are not included with the TV. Haier LCD HDTV EN-8...
VCR. (Refer to the VCR owner’s manual.) in the figure. Select the input source with using the INPUT button on the remote control, and then press button to select the source, press ENTER button to confirm. External A V Source Setup EN-9 Haier LCD HDTV...
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) If the graphic card on the computer does not output analog and digital RGB simultaneously, Use INPUT on the remote control to select Haier LCD HDTV EN-10...
If the source device has an analog audio output The synchronization input form for Horizontal and connector, connect the source device audio output to Vertical frequencies is separate. DVI Audio In port located on the left side of HDMI port. Resolution How To Use EN-11 Haier LCD HDTV...
Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only. If the polarized AC cord does not fit into a non- polarized AC outlet, do not attempt to file or cut Haier LCD HDTV EN-12...
/ ENTER button and then use button Press / ENTER button to select Tuner. to select Language. Press button to select language. Press button to select Cable or Antenna ( English, Spanish or French) mode. Press button to select Channel Scan. EN-13 Haier LCD HDTV...
/ ENTER button and then use button to select Channel Skip. Press button to select a channel, then press 1.Time shift time. The time delay to the current program ENTER button to toggle between and . time. Haier LCD HDTV EN-14...
Press CH+ button to select a channel number in The picture mode provides the pre-defined images number increasing direction. settings: Standard, Vivid, Custom and Mild . Press CH- button to select a channel number in Press MENU button and then use button to EN-15 Haier LCD HDTV...
Channel Tint Function Allows you to select the color mix (Tint) of the picture. Lock Sharpness Select EXIT Back This will adjust the sharpness of fine details in the MJC Demo picture. Note Haier LCD HDTV EN-16...
/ ENTER button and then use button Clock Function to adjust the setting. Lock Balance Adjust to emphasize left or right speaker balance. Bass ENTER Adjust Select EXIT Back Adjust to increase or decrease lower-pitched sounds. EN-17 Haier LCD HDTV...
SAP appear. If other languages are available on the Press button to select Low, Middle or High. digital signal, select them with the SAP button. Press EXIT button to save and return to TV viewing. DPMS Haier LCD HDTV EN-18...
Font Opacity Solid On Time 11:54 AM Background Color Black Function Off Time 12:00 AM Function Background Opacity Solid Lock Window Color Black Lock EN-19 Haier LCD HDTV Window Opacity Solid DTV Caption Style Select Date/Time Select EXIT EXIT Back Back...
Ratings for Movies previously shown in theaters: Window Opacity: To adjust the window opacity: Translucent, Transparent or Solid. MPAA Rating: Default (General audience) (Parental guidance suggested) Press VOL+/ ENTER button to enter the submenu. PG-13 (Parents strongly cautioned) (Restricted) Haier LCD HDTV EN-20...
14-3 Digital ATSC-3 Analog A password is required to gain access to this menu. Channel Block Select EXIT Back ENTER Press MENU button and then use button to select Lock menu. Then, press button. Program Block EN-21 Haier LCD HDTV...
Page 23
EXIT Back Note CA Fren Rating The V-chip will automatically block certain categories that are “More restrictive” . For example, Canadian French Language Rating if you block “ ” sub-rating in TV-PG, then the “ ” Haier LCD HDTV EN-22...
.( Press OK to display password menu and input your password.) Other Functions Brief Info Brief Info shows the present screen information. Press DISPLAY button to show the Brief Info on the EN-23 Haier LCD HDTV...
Closed captions allow viewers to read the commercials are made for broadcast with Closed Caption information included. Refer to your area’s dialogue and narration of television programs. TV program listings for the TV channels and times Haier LCD HDTV EN-24...
MENU button to display the option list. Press USB button on the remote to display multimedia. Press ENTER button on the remote to display the sub page. Press EXIT button on the remote to return to the previous menu. To play pictures EN-25 Haier LCD HDTV...
Video. 2. File Name 5. Audio Only Press button to select desired video 3. Repeat 6. Information folder, and then press ENTER button to enter the play interface. Press MENU button to display the option list. Haier LCD HDTV EN-26...
3. Show Info no data, then LED will not blink. Press the button on the remote control to select the Default init status: TV/Haier codeset. adjusted item, press ENTER button to confirm. 1. Play or pause Manually Programming the Control Stop Check the code no.
Page 29
Automatic Scan Programming the Controller Only digit 1, 2, 3 are valid in this mode. And the To automatic scan program the Controller: sequence is not fixed. Manually turn OFF the device you wish to power scan. Haier LCD HDTV EN-28...
Durabrand 053 097 137 341 335 338 key for 3 seconds, the LED will blink 3 times and turn off, Dwin 322 334 default Haier codeset (001) will be programmed to the Electroband Electrograph control. Electrohome 058 059 060 062...
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. EN-35 Haier LCD HDTV...
Page 20 for adjustments. Warranty Verify if correct channel is selected. No picture This Haier brand product, when shipped in its original Adjust the antenna. in some container, will be free from defective workmanship and Make adjustments by Fine Tune and...
Page 38
Haier be liable, or in any way responsible for incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.