Table of Contents
Advertisement
Quick Links
Warning
Warning
CAUTION
RISK ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
!
Caution:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do
not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Important Safety Instructions
1.
Read t
hese instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/ Apparatus combination to
avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
16.
The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus
normal use.
EN-1
Haier LCD HDTV
!
!
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Advertisement
Table of Contents
Related Manuals for Haier HL42XZK2a
Summary of Contents for Haier HL42XZK2a
-
Page 1: Warning
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use. EN-1 Haier LCD HDTV... -
Page 2: Fcc Statement
Energy Star compliant By being Energy Star compliant you are assured that your Haier model is helping the environment by using less energy while saving you money. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. -
Page 3: Safety Instructions
SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. -
Page 4: Table Of Contents
Select the desired program ..........15 Select the desired sound..........15 Mute..................15 Video menu ............15 How to select picture mode........... 15 How to customize your own picture status....16 PC Set..................17 Audio menu............17 How to select audio mode..........17 Haier LCD HDTV EN-4... -
Page 5: Introduction
Press to turn on and off the TV. Do not put anything near the sensor, which may block the remote control signal. Connect a USB flash drive to view MPEG2 videos, 6 USB input JPEG images or listen to MP3 songs. EN-5 Haier LCD HDTV... -
Page 6: Connection Options
Connect the audio L/R cables to your audio equipment. Connect the audio L/R cables from a computer PC Audio In to this jack. Connect a video cable from a computer to this PC Video In jack. Haier LCD HDTV EN-6... -
Page 7: Universal Remote Control
Press again to return to the program. Q CH.LIST Open the channel list in TV. R FAV.LIST Press to open the favorite channel list in TV. S ARC(Aspect Ratio Control) Press to change the aspect ratio. EN-7 Haier LCD HDTV... -
Page 8: Installation
If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter” in the connections. To install the antenna properly please contact a professional in your area. Note All cables shown are not included with the TV. Haier LCD HDTV EN-8... -
Page 9: Choose Your Connection
VCR. (Refer to the VCR owner’s manual.) in the figure. Select the input source with using the INPUT button on the remote control, and then press button to select the source, press ENTER button to confirm. External A V Source Setup EN-9 Haier LCD HDTV... -
Page 10: Connecting A Dtv (Digital Tv)
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) If the graphic card on the computer does not output analog and digital RGB simultaneously, Use INPUT on the remote control to select Haier LCD HDTV EN-10... -
Page 11: Hdmi And Dvi Input
If the source device has an analog audio output The synchronization input form for Horizontal and connector, connect the source device audio output to Vertical frequencies is separate. DVI Audio In port located on the left side of HDMI port. Resolution How To Use EN-11 Haier LCD HDTV... -
Page 12: Connecting Headphones
Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only. If the polarized AC cord does not fit into a non- polarized AC outlet, do not attempt to file or cut Haier LCD HDTV EN-12... -
Page 13: Operation
/ ENTER button and then use button Press / ENTER button to select Tuner. to select Language. Press button to select language. Press button to select Cable or Antenna ( English, Spanish or French) mode. Press button to select Channel Scan. EN-13 Haier LCD HDTV... -
Page 14: Channel Skip
/ ENTER button and then use button to select Channel Skip. Press button to select a channel, then press 1.Time shift time. The time delay to the current program ENTER button to toggle between and . time. Haier LCD HDTV EN-14... -
Page 15: Select The Desired Program
Press CH+ button to select a channel number in The picture mode provides the pre-defined images number increasing direction. settings: Standard, Vivid, Custom and Mild . Press CH- button to select a channel number in Press MENU button and then use button to EN-15 Haier LCD HDTV... -
Page 16: How To Customize Your Own Picture Status
Channel Tint Function Allows you to select the color mix (Tint) of the picture. Lock Sharpness Select EXIT Back This will adjust the sharpness of fine details in the MJC Demo picture. Note Haier LCD HDTV EN-16... -
Page 17: Pc Set
/ ENTER button and then use button Clock Function to adjust the setting. Lock Balance Adjust to emphasize left or right speaker balance. Bass ENTER Adjust Select EXIT Back Adjust to increase or decrease lower-pitched sounds. EN-17 Haier LCD HDTV... -
Page 18: Sap Broadcasts Setup
SAP appear. If other languages are available on the Press button to select Low, Middle or High. digital signal, select them with the SAP button. Press EXIT button to save and return to TV viewing. DPMS Haier LCD HDTV EN-18... -
Page 19: Dpms
Font Opacity Solid On Time 11:54 AM Background Color Black Function Off Time 12:00 AM Function Background Opacity Solid Lock Window Color Black Lock EN-19 Haier LCD HDTV Window Opacity Solid DTV Caption Style Select Date/Time Select EXIT EXIT Back Back... -
Page 20: Lock Menu
Ratings for Movies previously shown in theaters: Window Opacity: To adjust the window opacity: Translucent, Transparent or Solid. MPAA Rating: Default (General audience) (Parental guidance suggested) Press VOL+/ ENTER button to enter the submenu. PG-13 (Parents strongly cautioned) (Restricted) Haier LCD HDTV EN-20... -
Page 21: Lock Setup
14-3 Digital ATSC-3 Analog A password is required to gain access to this menu. Channel Block Select EXIT Back ENTER Press MENU button and then use button to select Lock menu. Then, press button. Program Block EN-21 Haier LCD HDTV... - Page 22 EXIT Back Note CA Fren Rating The V-chip will automatically block certain categories that are “More restrictive” . For example, Canadian French Language Rating if you block “ ” sub-rating in TV-PG, then the “ ” Haier LCD HDTV EN-22...
-
Page 23: Other Functions
.( Press OK to display password menu and input your password.) Other Functions Brief Info Brief Info shows the present screen information. Press DISPLAY button to show the Brief Info on the EN-23 Haier LCD HDTV... -
Page 24: Quick Program View
Closed captions allow viewers to read the commercials are made for broadcast with Closed Caption information included. Refer to your area’s dialogue and narration of television programs. TV program listings for the TV channels and times Haier LCD HDTV EN-24... -
Page 25: Usb Input
MENU button to display the option list. Press USB button on the remote to display multimedia. Press ENTER button on the remote to display the sub page. Press EXIT button on the remote to return to the previous menu. To play pictures EN-25 Haier LCD HDTV... -
Page 26: To Play Music
Video. 2. File Name 5. Audio Only Press button to select desired video 3. Repeat 6. Information folder, and then press ENTER button to enter the play interface. Press MENU button to display the option list. Haier LCD HDTV EN-26... -
Page 27: Universal Remote Control
3. Show Info no data, then LED will not blink. Press the button on the remote control to select the Default init status: TV/Haier codeset. adjusted item, press ENTER button to confirm. 1. Play or pause Manually Programming the Control Stop Check the code no. - Page 28 Automatic Scan Programming the Controller Only digit 1, 2, 3 are valid in this mode. And the To automatic scan program the Controller: sequence is not fixed. Manually turn OFF the device you wish to power scan. Haier LCD HDTV EN-28...
-
Page 29: Remote Control Codes
Durabrand 053 097 137 341 335 338 key for 3 seconds, the LED will blink 3 times and turn off, Dwin 322 334 default Haier codeset (001) will be programmed to the Electroband Electrograph control. Electrohome 058 059 060 062... - Page 30 055 320 187 Polaroid 211 217 220 228 315 339 266 Vidtech 060 061 062 349 188 Portland 060 061 062 066 076 333 349 352 267 Viewsonic 133 214 218 223 233 243 316 356 Haier LCD HDTV EN-30...
- Page 31 042 063 124 133 159 204 225 285 324 354 385 386 Hitachi 014 136 203 244 Hiteker Symphonic 133 159 385 Teac 266 328 371 379 380 iLive Technics iLuv Techwood Initial 278 343 Terapin EN-31 Haier LCD HDTV...
- Page 32 004 005 006 007 008 033 036 038 039 046 064 065 066 075 111 123 131 135 Stack 013 031 Hughes Network Systems 013 110 122 124 125 130 Superscan Humax 110 122 Sylvania 008 010 020 021 031 032 048 062 088 116 Haier LCD HDTV EN-32...
- Page 33 Panasonic 028 030 044 Pansat Paragon Paysat Philips 017 018 023 Philco Pioneer 002 026 033 038 046 Popular Mechanics Philips 008 016 017 019 021 022 049 050 085 Pioneer Proscan 009 010 Pulsar Primestar EN-33 Haier LCD HDTV...
- Page 34 110 Regent Casio Chase Technologies 111 Rio Clarinette 112 Rotel Classe 113 Samsung 084 103 138 143 Classic 114 Sansui 291 318 Coby 147 331 115 Sanyo 238 326 116 Sharp 205 242 296 Creative 274 302 Haier LCD HDTV EN-34...
-
Page 35: Maintenance
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. EN-35 Haier LCD HDTV... -
Page 36: Warranty
Page 20 for adjustments. Warranty Verify if correct channel is selected. No picture This Haier brand product, when shipped in its original Adjust the antenna. in some container, will be free from defective workmanship and Make adjustments by Fine Tune and... - Page 37 Haier be liable, or in any way responsible for incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.
- Page 38 Warranty Haier LCD HDTV EN-38...