Preparation; Attaching The Base; Preparing Your Lcd Hdtv For Wall Mounting - Haier HL19D2a User Manual

PREPARATION

IMPORTANT: Do not apply pressure to the
screen display area which may compromise
the integrity of the display. The manufacturer's
warranty does not cover user abuse or
improper installations.

ATTACHING THE BASE

IMPORTANT: The Base of the HDTV must
be assembled prior to usage.
For HL19D2 / HL24XD2
1. Place TV unit face down on a soft and
flat surface (blanket, foam, cloth, etc.) to
prevent any damage to the HDTV.
2. Carefully align and insert the Base to the
stand.
3. Gently push the Base towards the HDTV
until the locking mechanism locks into
place.
For HL32D2
1. Place TV unit face down on a soft and
flat surface (blanket, foam, cloth, etc.) to
prevent any damage to the HDTV.
2. Carefully align and insert the Base to the
stand.
3. Insert the screws to the bottom of the
base and tighten the base to the stand.
PREPARING YOUR LCD HDTV FOR
WALL MOUNTING
We suggest that you keep your TV at least 2.36
inches (60 mm) from the wall to prevent cable
interference.
Before mounting your TV on the wall, you need
to remove the base.
For your safety, please use only with UL listed
wall mount bracket with minimum weight of
the TV without stand. (Please see page 23.)
To attach a wall mount bracket to your TV:
For HL19D2 / HL24XD2
1. Remove the screws holding your TV to the
stand.
2. Remove the stand base from your TV.
3. Secure the wall mount bracket to the
back of your TV using four M4 screws, as
indicated in the illustration.
100 mm
For HL32D2
1. Remove the screws holding your TV to the
stand.
2. Remove the stand base from your TV.
3. Secure the wall mount bracket to the
back of your TV using four M6 screws, as
indicated in the illustration.
200 mm
9
100 mm
200 mm