Samsung NP-Q1UA000 Getting Started Manual page 65

Method 1. Configuring with the MENU Button
1
Connect the monitor and touch the MENU button to launch the MENU program.
MENU button (For models with the
Touch Sensor button only)
2
Press the button to the right of the LCD/CRT button to switch to a different mode.
Whenever you press the button to the right of the LCD/CRT button, the computer
screen is output to LCD > CRT > LCD+CRT Clone > LCD+CRT Dual View mode,
in this sequence.
● LCD: You can view the computer screen through the LCD only.
● CRT: You can view the computer screen on an external monitor.
● LCD+CRT Clone: When selecting this mode, you can view the same screen on
both the LCD and the external monitor.
● LCD+CRT Dual View: When selecting this mode, you can view a screen
spanning over the LCD and the external monitor, and you can set different
resolutions for each display device.
Displaying the computer screen on an external monitor only, may not be supported
with the MENU button. In this case, to display the screen on an external monitor, try
using the Intel program. p.66
65
MENU button
(For models without the
Touch Sensor button only)
LCD/CRT Item