Samsung NP-Q1UA000 Getting Started Manual page 199

Removing Recovery Solution
If you do not need or use Samsung Recovery Solution II, you can remove the
Recovery Solution program.
Removing the Samsung Recovery Solution II Program
▶
Even if you remove the Samsung Recovery Solution II program, only the program is
removed leaving the restoration area on the disk unchanged.
Therefore you can use the Backup, Restore and Install functions by pressing the F4
or F7 key while booting up even after the Samsung Recovery Solution II program is
removed.
1
Click Start > Control Panel > Add or Remove Programs.
2
Select Samsung Recovery Solution II and click the Change/Remove button. Then
the Samsung Recovery Solution II program will be removed.
199